Liberon Wood Stopping
Liberon Wood Stopping is a natural wood flour based stopping for filling small holes, cracks and gaps. Wood Stopping is a traditional stopping to make repairs in unfinished wood.
- Made from wood pulp
- Dries as hard as wood
- Ready to use
- Quick drying
- Easy to sand
- Cellulose based solvent
- Wide range of colours available
Application Select the shade of Wood Stopping that most closely resembles the final finished colour required. To obtain other wood shades either mix the Stoppings together or mix in Earth Pigments before applying. Spread and press Liberon Wood Stopping into the repair area with a painter’s knife or similar tool. For best results resist overspreading, but leave sufficient over fill to enable thorough sanding. Allow to dry thoroughly -10 minutes or longer, depending on the depth of the repair.
Fill deep cavities in several stages, several thin layers will dry more rapidly than one heavy application. Close tin tightly. If contents become dry, this product may be reconstituted with cellulose thinner
Important
Always test product on a spare surface or inconspicuous area for colour, compatibility and end results. Wood Stopping may accept dyes/stains differently to surrounding wood.
Precautions The use of gloves is recommended when applying this product. Neutral | Light Oak | Medium Oak | Georgian Mahogany | Antique Pine |
|