Liberon Natural Finish
Liberon Natural Finish Floor Varnish is a hard wearing water based varnish which is ideal for use on soft or hard wood flooring. Keeping the natural feel and look of the timber Natural Finish Floor Varnish uses a non-yellowing and quick drying formula.
- Maintains the natural feel and look of the timber
- European Eco-label scheme approved
- Water based, low VOC
- 2Highly resistant to scratches and stains
- Provides a hard, durable and long lasting finish
- Ideal for soft and hard woods
- EN71 Part 3 Approved : Safe for toys
- Usage : Interior
- L = 10-12 m²
- Available in matt or satin sheens
Sand the floor if required and remove all previous finishes. Ensure the surface is clean, dry and dust free.
Shake / stir well before use. Apply a reasonable coat of Natural Finish Floor Varnish evenly using a paint brush or short hair roller and allow to dry for a minimum of 2 hours before applying further coats. We recommend a minimum of 3 coats are applied, sanding lightly between coats if required. More coats may be required for heavy traffic areas. Allow the final coat of varnish a minimum of 24 hours drying time before using the floor.
Allow all wood dyes to dry for a minimum of 8 hours before applying Natural Finish Floor Varnish. Care must be taken on the application of the first coat of Natural Finish Floor Varnish when being used over Liberon Palette Dye. Keep brush strokes to a minimum as over brushing may lift out the colour. The varnish may raise the grain on some hard woods.
Always test product on a spare surface or inconspicuous area for colour compatibility and end result. Product may slightly darken some woods.
Wipe any spills immediately. For general maintenance wipe over with a damp mop or cloth using a mild detergent if required. If the surface shows signs of wear re-apply a coat of varnish or coat with Liberon Wood Floor Reviver.