02380 232066
searcharrow findarrow
We are OPEN for Shipping and Click & Collect - pre-paid orders only. Latest Covid 19 Update: Click to learn more >>
Supplying the trade since 1983
Traditional & modern wood finishing materials, furniture fittings & metal patination products
john penny pricelist
Product Range

Morrells 2-Pack Polyurethane Lacquer

Morrells 2-Pack Polyurethane LacquerA fast curing, easy to use 2-component polyurethane lacquer with outstanding resistance to abrasion, heat, chemical attack and water ingress. 80% of the drying/curing is completed with 24 hours which greatly assists production flow. Catalysed at 2:1 this lacquer has a usable pot life of 3 hours at 20C.

  • Extremely good water & heat resistance
  • Fast curing time
  • Choice of sheen level
  • Mixing ratio : 2 parts lacquer to 1 part catalyst
  • Pack sizes : Lacquer : 5 litres, Catalyst : 2.5 litres, Thinners - 5 litres
  • Drying Time : 25 minutes touch, 60-90 minutes recoatable.
  • Pot Life : 3 hours @ 20 deg C
  • Coverage : 40m2 per 5 litres approx.

  • 2 parts PU lacquer must be mixed with 1 part 6CAT23 catalyst by either volume or weight prior to use.
    The catalysed lacquer can be thinned as necessary with the appropriate thinners (upto 20% by volume is recommended).
    Over-thinning can lead to a reduction in properties and will increase VOC emissions.
  • Morrells recommends the following guidance for use of this product:
    Typical Finish:1-3 coats at 75g/m2 per coat (Dry Film Thickness ~ 31μ per coat) applied coaton-
    coat or over Morrells PU Sealer/Basecoat 6FPU35.
    Using these products in systems outside these guidelines can lead to immediate and latent problems with the integrity of the finish.
  • Designed for spray application.
  • Morrells do not recommend the mixing of catalysed material with fresh material. Always catalyse enough products for the job and consider the pot-life.
  • Use only with the recommended catalyst : the use of non-recommended catalyst can cause patchy/uneven drying.
  • Under or over catalysing can cause impairment of cure and cracking.
  • Use only the recommended thinner. Use of non-recommended thinner can cause uneven/patchy drying.
  • Excessive coating weights can lead to cracking or lifting.
  • Leave adequate time between coats. Do not apply more than 3 coats in one day. Denib between coats to aid adhesion
  • Do not overcoat with Acid Catalyst (AC) products.
  • This range is not suitable for "pulling over".
  • Product should be stored above 5oC and protected from frost.
  • Optimum application is achieved between 18oC and 22oC with good air movement and ventilation.
  • Finished products should not be subjected to environments with temperatures of < 2oC.

Note : The Topcoat and Catalyst are listed separately and should be ordered together. The Topcoat will not cure without the catalyst.

Add this product to your cart below.
The required size can be selected from the 'price' drop down box.
Use Multi Add Form q mark
close form
Multiple variations (eg colours) and sizes of this product can be added to your cart in one operation using the multi add form. This saves you having to add a product to your cart, then returning to the product page to add another variation.
Your selections will appear at the bottom of the form. If correct, click "add these items to cart" to add your current list to your cart.
Product Variations for Morrells 2-Pack Polyurethane Lacquer
Prices are exclusive of VAT
Topcoat Gloss 6901/460 90% 5 litres - £46.95
Topcoat Satin 6302/460 30% 5 litres - £46.95
Topcoat Matt 6102/460 10% 5 litres - £46.95
Catalyst 6CAT23 2.5 litres - £27.95
Thinners 6007/100 5 litres - £34.95
Items To Be Added To Cart [ 0 ]
Product Price Qty Add To Cart
Morrells 2-Pack Polyurethane Lacquer
More Information ...



[ Home | About Us | Contact Us | Directions | Sitemap | Terms Of Sale | Pricelist | HSDS | Postage | Privacy Policy]

© 2022 John Penny Restoration Ltd Unit 10, City Industrial Park, Southern Road, Southampton, Hampshire SO15 1HA