?>
02380 232066
searcharrow findarrow
 
Supplying the trade since 1983
Traditional & modern wood finishing materials, furniture fittings & metal patination products
john penny pricelist
Product Range
 
 
£8.95

Verdigris Patination Fluid
for Copper, Brass & Bronze

Add this product to your cart below.
The required size can be selected from the 'price' drop down box.
Use Multi Add Form q mark
close form
Multiple variations (eg colours) and sizes of this product can be added to your cart in one operation using the multi add form. This saves you having to add a product to your cart, then returning to the product page to add another variation.
Your selections will appear at the bottom of the form. If correct, click "add these items to cart" to add your current list to your cart.
Product Variations for Verdigris Fluid
Prices are exclusive of VAT
250ml - £8.95
1 litre - £20.95
5 litres - £74.50
Items To Be Added To Cart [ 0 ]
<'td>
Product Price Qty Add To Cart
Verdigris Fluid

Verdigris FluidA cold patination fluid for producing a green verdigris effect on copper, brass & bronze. This will produce a genuine verdigris coating by a chemical reaction with the surface metal.


  • Please read instructions carefully as the method of use differs slightly from the Antiquing Fluid guidelines


  • Creates genuine verdigris patina.
  • Fast and effective
  • Ideal for use in antique restoration
  • Easy to use
  • Etches the colour onto the surface
  • Usage : Interior

Preparation
Remove any metal lacquer using paint stripper or similar solvents. Thoroughly remove and clean any grease or oil, including fingerprints, with Cold Patination Pre-Treatment and Liberon Ultra Fine Steel Wool (0000), rinse with cold water, then wipe or blow dry.

  • Proper preparation of the surface is essential if a uniform colour is to be achieved.
Application

Dilute the Verdigris Fluid approximately 1:2 with water.
1) Apply the diluted Verdigris Fluid directly onto the item, using either cotton wool or a brush.
Leave the item for approx 18 hours (do not rinse).

2) Alternatively, the item may be immersed in the solution. In this case, immerse the item for 5 - 10 minutes. Remove and allow to dry for approx 18 hours (do not rinse).

Post Treatment

A green powdery residue should now be present on the metal surface. Apply Liberon Jade Oil to remove any remaining moisture and to fix the colour. Alternatively a lacquer or a beeswax polish may be used.
Important
Do not use more dilute than the recommended dilution ratio (1 : 2); although the reaction time may be faster, the resulting patina may be powdery and unstable, and contain unwanted residues.
Ensure the treated item is sealed afterwards. Liberon Jade Oil, a beesax polish or lacquer may be used.
Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.

Precautions
· Do not touch the bare surface before treating as skin perspiration or finger grease will affect the final result.
· Wash hands thoroughly after use.
· Extreme care should be taken when colouring items made with brass or copper plate as Verdigris Fluid may remove all the plate leaving the base metal behind.


More Information ...
verdigris.jpg

 

Related Products...

Cold Patination Pre-treatment
Cold Patination Pre-treatment
Rustins Metal Lacquer
Rustins Metal Lacquer

 

[ Home | About Us | Contact Us | Directions | Sitemap | Terms Of Sale | Pricelist | HSDS | Postage | Privacy Policy]

© 2024 John Penny Restoration Ltd Unit 10, City Industrial Park, Southern Road, Southampton, Hampshire SO15 1HA