Rustins Advanced Wood Preserver is a low odour, non-flammable product based on micro-emulsion nanotechnology. The ultra-fine particle size allows deep penetration of the preserver to take place so the performance of the product is much greater than standard wood preservation products. It is quick drying and can be applied to wet or dry timbers. For use against wood boring insects and wood rotting fungi within domestic, commercial, institutional and industrial premises.
Finely dispersed ingredients giving better wood penetration and hence effectiveness compared with standard wood preservation products.
For outdoor applications the Clear Preserver needs to be over coated with an outdoor varnish or oil.
Apply more coats while the last coat is still wet.
Water based formula
Usage : Exterior
Coverage : 1 litre = 3 - 4 m²
Drying Time : 10 - 15 minutes
Available in Clear only.
How To Use
Application Ensure that timber surfaces are clean and free from previous coatings, grease and contaminants. Surfaces may be damp but the preserver should not be applied to decayed wood which should be replaced.
Shake well and stir before use. Apply by brush or coarse spray.
For outdoor applications the Rustins Advanced Wood Preserver needs to be over coated with an outdoor varnish or oil.
Very toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environment.
Keep out of reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of water. Wear protective clothing, gloves and eye/face protection.