Liberon Liquid Beeswax Polish
Special Offer - 5 litres Liquid Beeswax : £46.95
Liberon Liquid Beeswax is ideal for feeding absorbent woods such as pine and oak. It's especially suited to large unsealed surfaces such as beams, panelling, doors etc.
- Traditional wax that nourishes wood
- Pure beeswax & turpentine formulation
- Feeds wood and protects against dryness
- Gives an authentic finish
- Ideal for use on large surfaces
- Suitable for hard and softwoods
- EN71 Part 3 Approved : Safe for toys
- Usage : Interior
- Coverage : 1 litre = 6-8 m²
- Drying Time : 6 hours
Remove old waxes and dirt with Liberon Wax and Polish Remover if necessary. Ensure the surface is clean, dry and free from dust.
Shake well before use. Apply Liberon Liquid Beeswax Polish with a cloth, brush or spray gun. Allow to become touch dry for a minimum of 1 hour , or longer if possible, then buff with a clean cotton cloth, or for a faster finish with a Liberon Drill Brush. Repeat the operation on new or very dry wood as it may require two or more coats. For a better quality finish apply thin coats of wax and build-up to the desired level of sheen, buffing between coats.
Not suitable for high water areas such as kitchens and bathrooms.
In cold weather wax may thicken. To soften remove cap and stand in a bowl of hot water for 5 minutes, replace the cap and shake. Repeat if necessary.
Wipe over with a cloth or duster and re-wax as required. Do not wash with water.